Materials and Metallurgical Engineering

1

Dislocation Density Evolution and Flow Stress Modelling During Cold Drawing of Low Carbon Steel Wire for Nigerian Reinforcement Applications

PhD
2

High-Entropy Alloy Design for Extreme Environment Applications: Synthesis, Characterisation, and Property Prediction Using Machine Learning Guided by Nigerian Materials Research Infrastructure

PhD
3

Microstructural and Micromechanical Origins of In-Service Cracking in Nickel-Based Superalloy Hot Section Components from Nigerian Gas Turbines

PhD
4

Coupled Thermal-Electrochemical Modelling of Localised Corrosion Under Disbonded Coatings on Buried Pipelines in Tropical Nigerian Soils

PhD
5

Fracture Mechanics Based Remaining Life Assessment of Cracked Pressure Vessels in Nigerian Chemical Processing Facilities

PhD
6

Thermoelectric Properties of Bismuth Telluride Compounds Synthesised from Nigerian Ore Sources for Waste Heat Recovery in Metallurgical Furnaces

PhD
7

Quantum Mechanical Investigation of Adhesion and Interface Stability Between TiN Coating and Cemented Carbide Substrate

PhD
8

Integrated Computational Materials Engineering Approach to Alloy Design for Elevated Temperature Service in Nigerian Gas Turbine Applications

PhD
9

Plasticity and Damage Mechanics of Gradient Microstructure Steel Produced by Surface Severe Plastic Deformation: Theoretical and Experimental Study

PhD
10

Development of a Probabilistic Corrosion Degradation Model for Ageing Crude Oil Pipeline Infrastructure in the Niger Delta

PhD
11

Surface Reconstruction and Catalytic Activity of Iron-Based Fischer-Tropsch Catalysts Derived from Nigerian Magnetite Ore Under In Situ Conditions

PhD
12

Radiation Shielding Properties of High-Density Concrete Incorporating Nigerian Barite Aggregate: A Theoretical and Experimental Investigation

PhD
13

Atomistic Simulation of Grain Boundary Segregation and Embrittlement in Low Alloy Steel Welds Under Temper Embrittlement Conditions

PhD
14

Multi-Scale Modelling of Deformation and Fracture in Aluminium Foam for Crashworthiness Applications in Nigerian Automotive Design

PhD
15

Thermomechanical Processing Design for Microstructural Control in Niobium-Microalloyed Pipeline Steel: An Integrated CALPHAD and FEM Approach

PhD
16

Computational Thermodynamics of Oxide Inclusion Formation During Secondary Metallurgy in Nigerian Electric Arc Furnace Steelmaking

PhD
17

First-Principles Investigation of the Effect of Alloying Elements on Stacking Fault Energy and Deformation Mechanisms in FCC Steels for Nigerian Manufacturing

PhD
18

Development and Validation of a Constitutive Model for the Hot Deformation Behaviour of Austenitic Stainless Steel Relevant to Nigerian Industrial Forming Operations

PhD
19

Theoretical Framework for Stress Corrosion Cracking Susceptibility in High Strength Pipeline Steels Operating in Nigerian Sour Environments

PhD
20

A Unified Phase Field Model for Solidification and Solid-State Transformation in Multi-Component Steels: Application to Nigerian Blast Furnace Products

PhD
21

Synthesis and Electrochemical Performance of Manganese Dioxide Nanostructures from Nigerian Pyrolusite Ore for Supercapacitor Applications

Masters
22

Fracture Toughness Characterisation of Weld Heat-Affected Zones in Offshore Platform Structural Steel Using CTOD Testing

Masters
23

Characterisation of Iron Oxide Pigments from Itakpe Tailings for Use in Construction Materials

Masters
24

Effect of Carbon Nanotube Reinforcement on Electrical and Mechanical Properties of Copper Matrix Composites for Electrical Contact Applications

Masters
25

Microstructural Evolution and Mechanical Response of AISI 304 Stainless Steel Under Multiaxial Fatigue Loading: Relevance to Pressure Vessel Design in Nigeria

Masters
26

Investigation of Pitting Corrosion Mechanisms in Carbon Steel Pipelines Carrying Sour Crude Oil in the South South Zone

Masters
27

Phase Transformation Behaviour and Mechanical Properties of Ti-6Al-4V Alloy Fabricated by Selective Laser Melting: Relevance to Nigerian Biomedical and Aerospace Applications

Masters
28

Empirical Investigation of Carbon Equivalent and Weldability of Rebar Steels Produced by Induction Furnace Mills in South West Nigeria

Masters
29

Analytical Investigation of Slag Inclusions in Nigerian Weld Fabrications Using Electron Microscopy and Their Effect on Fatigue Life

Masters
30

Development of Lead-Free Bronze Alloys as Bearing Materials for Sustainable Manufacturing in Nigeria

Masters
31

Effect of Post-Weld Heat Treatment on the Corrosion Resistance of Stainless Steel Welds in Chemical Processing Equipment

Masters
32

Synthesis and Characterisation of Nano-Hydroxyapatite from Nigerian Bovine Bones for Biomedical Scaffold Applications

Masters
33

Wear Behaviour of WC-Co Hardmetal Cutting Tools in Dry Machining of Nigerian Locally Produced Cast Iron

Masters
34

Thermodynamic Modelling of Slag-Metal Equilibria in Nigerian Electric Arc Furnace Steelmaking Using FactSage Software

Masters
35

Characterisation of Surface Coatings Produced by Plasma Electrolytic Oxidation on Locally Available Aluminium Alloys

Masters
36

Investigation of Hydrogen Embrittlement Susceptibility of High Strength Steels Used in Offshore Mooring Chains in Nigeria

Masters
37

Kinetics of Austenite Grain Growth in Low Alloy Pipeline Steels: An Empirical Study Using Nigerian Crude Oil Processing Conditions

Masters
38

Electrochemical Behaviour of Duplex Stainless Steel in Simulated Oilfield Brine from the Offshore Niger Delta

Masters
39

Mechanical and Thermal Properties of Alumina-Mullite Refractory Castables Incorporating Nigerian Kaolin as a Raw Material

Masters
40

Modelling of Solidification Microstructure in Continuously Cast Steel Billets from the Delta Steel Company Using Finite Element Analysis

Masters
41

Life Cycle Assessment of Structural Steel Use in Commercial Building Construction in Lagos: A Materials Engineering Approach

PGD
42

Characterisation and Beneficiation of Lead-Zinc Ore from Ebonyi State Deposits for Concentrate Production

PGD
43

Evaluation of Fly Ash-Based Geopolymer Mortar for Repair of Deteriorated Reinforced Concrete Structures in North East Nigeria

PGD
44

Occupational Health Risks from Metal Dust Exposure in Nigerian Metal Fabrication Workshops: A Materials Engineering Perspective

PGD
45

Case Study Analysis of Mineral Processing Operations at the Osun State Gold Mining Project: Efficiency and Recovery Assessment

PGD
46

Technical and Economic Evaluation of Secondary Aluminium Smelting from Scrap in South West Nigeria

PGD
47

Evaluation of Locally Produced Steel Reinforcement Bars Against NIS and BS 4449 Standard Requirements in South East Nigeria

PGD
48

Professional Development and Training Needs of Metallurgical Engineers in Nigerian Process Industries

PGD
49

Assessment of Refractory Lining Performance in Electric Arc Furnaces at Nigerian Steel Plants

PGD
50

Surface Engineering Practices for Extending Tool Life in Nigerian Machine Shops: A Professional Benchmarking Study

PGD
51

Evaluation of Weld Procedure Qualification Practices in Nigerian Oil Sector Fabrication Under ASME and AWS Codes

PGD
52

Management of Spent Refractories from Nigerian Cement Plants: Environmental Compliance and Recycling Options

PGD
53

Assessment of Indigenous Steel Fabrication Capacity for Renewable Energy Infrastructure in Nigeria’s North Central Zone

PGD
54

Material Selection Strategies for Petrochemical Processing Equipment in the Nigerian Refining Industry

PGD
55

Technical Evaluation of Coatings for Corrosion Protection of Steel Structures in Nigeria’s Coastal Industrial Zone

PGD
56

Professional Practice in Failure Analysis of Engineering Components in Nigerian Manufacturing Industries

PGD
57

Waste Reduction and Material Efficiency in Nigerian Iron Foundries: A Lean Manufacturing Assessment

PGD
58

Non-Destructive Testing Practices in Nigerian Oil and Gas Fabrication Yards: A Professional Competency Assessment

PGD
59

Quality Management Systems in Nigerian Steel Rolling Mills: Implementation Challenges and Performance Outcomes

PGD
60

Management of Corrosion Protection Systems for Subsea Pipelines in the Niger Delta: Operational Challenges and Best Practices

PGD
61

Assessment of Waste Tyre Rubber as Aggregate Modifier in Asphalt Pavement Mixes for Low-Volume Roads in Oyo State

Undergraduate
62

Study of Structural Steel Corrosion in Industrial Atmospheric Environments of Warri, Delta State

Undergraduate
63

Analysis of the Mechanical Properties of Recycled PET Plastic Composites for Lightweight Structural Applications

Undergraduate
64

Characterisation of Columbite-Tantalite (Coltan) Ore from Nasarawa State for Niobium and Tantalum Recovery

Undergraduate
65

Investigation of Iron Ore Beneficiation Using Magnetic Separation and Gravity Methods on Itakpe Ore, Kogi State

Undergraduate
66

Evaluation of Marble Dust as a Filler Material in Bituminous Concrete Mixes in Abuja Federal Capital Territory

Undergraduate
67

Properties of Stabilised Compressed Earth Blocks Using Lime and Cement for Low-Cost Housing in Adamawa State

Undergraduate
68

Metallurgical Analysis of Failed Bridge Structural Steel Members in North West Nigeria: A Case Study Approach

Undergraduate
69

Effect of Fly Ash Addition on Compressive Strength and Durability of Concrete in Hot and Humid Conditions of Lagos

Undergraduate
70

Characterisation of Titanium Ore (Ilmenite) Deposits in Cross River State for Potential Titanium Dioxide Production

Undergraduate
71

Evaluation of the Pozzolanic Activity of Palm Bunch Ash from Rivers State Oil Palm Processors

Undergraduate
72

Mechanical Behaviour of Hybrid Natural Fibre Composites from Coir and Jute Reinforced Epoxy in Tropical Nigerian Conditions

Undergraduate
73

Production of Ceramic Floor Tiles from Local Raw Materials in Kogi State: Physical and Mechanical Property Evaluation

Undergraduate
74

Study of Mechanical Properties and Tribological Behaviour of Al-SiC Composite Fabricated by Powder Metallurgy in a Nigerian University Laboratory

Undergraduate
75

Characterisation of Local Feldspar Deposits in Ogun State for Ceramic and Glass Raw Material Applications

Undergraduate
76

Assessment of Groundwater Contamination by Iron and Manganese from Mining Activities in Zamfara State

Undergraduate
77

Analysis of Mechanical Failure Modes in Agricultural Irrigation Pump Components Manufactured Locally in Kebbi State

Undergraduate
78

Evaluation of Copper Slag as a Fine Aggregate Substitute in Concrete for Industrial Applications in Lagos State

Undergraduate
79

Investigation of the Properties of Sugarcane Bagasse Ash as an Agricultural Waste-Based Filler in Bituminous Concrete

Undergraduate
80

Determination of Optimal Mix Design for Self-Compacting Concrete Using Metakaolin from Kogi State

Undergraduate
81

Assessment of Zinc Oxide Nanoparticle Production from Local Zinc Ore in Plateau State Using Sol-Gel Method

Undergraduate
82

Study of the Effect of Ageing on Mechanical Properties of AA6061 Aluminium Alloy Used in Local Manufacturing

Undergraduate
83

Evaluation of Laterised Brick Production Using Local Materials in Osun State: Mechanical and Durability Properties

Undergraduate
84

Investigation of Corrosion Inhibition Efficiency of Bitter Leaf Extract on Mild Steel in Acidic Medium

Undergraduate
85

Characterisation of Clay Deposits in Sokoto State for Potential Use in Refractory Brick Production

Undergraduate
86

Comparative Study of Tensile Properties of Glass Fibre and Sisal Fibre Reinforced Polyester Composites

Undergraduate
87

Microstructural Analysis of Welded Joints in Low Carbon Steel Used for Pipeline Construction in Rivers State

Undergraduate
88

Effect of Heat Treatment on the Hardness and Microstructure of Locally Sourced Carbon Steel in Ogun State

Undergraduate
89

Production and Characterisation of Activated Carbon from Palm Kernel Shell for Water Treatment Applications in Edo State

Undergraduate
90

Analysis of Slag Composition and Utilisation Potential from Delta Steel Company Operations in Delta State

Undergraduate
91

Evaluation of Cow Bone Ash as a Partial Replacement for Calcium Carbonate in Ceramic Glaze Formulations in Kaduna State

Undergraduate
92

Assessment of the Quality of Locally Produced Aluminium Cooking Pots in Onitsha Foundries, Anambra State

Undergraduate
93

Study of Bamboo Fibre as a Natural Reinforcement for Epoxy Composites: Mechanical and Water Absorption Behaviour

Undergraduate
94

Determination of Mechanical Properties of Locally Fabricated Steel Billets from Ajaokuta Steel Company Products

Undergraduate
95

Characterisation of Rice Husk Ash and Its Potential as a Reinforcement in Polymer Composites in Ebonyi State

Undergraduate
96

Characterisation of Laterite Soil as a Partial Replacement for Fine Aggregate in Concrete Production in Ekiti State

Undergraduate
97

Investigation of the Wear Properties of Grey Cast Iron Used in Agricultural Equipment in Benue State

Undergraduate
98

Evaluation of Groundnut Shell Ash as a Supplementary Cementitious Material in Concrete Production in Kano State

Undergraduate
99

Effect of Varied Kaolin Content on the Mechanical Properties of Aluminium-Kaolin Particulate Composites

Undergraduate
100

Assessment of Corrosion Behaviour of Mild Steel Reinforcement Bars in Coastal Environments of Bayelsa State

Undergraduate

100 topic(s) found